One particular decor element that has taken root – and is quickly gaining ground in the region this year – is the crescent tree.

Chances are you’ve come across it yourself: the artificial tree comes in a number of sizes and colours, with its defining feature being its distinct crescent moon shape.

With its Instagram-friendly appearance, it has blown up online under different names – moon tree, green ramadan eid crecsent moon tree, Ramadan tree and even Eid tree – as more families take to them. A search for #RamadanTree on Instagram turns up more than 1,000 posts, while one for #EidTree yields over 1,500; impressive since three years ago, they didn’t really exist.

So how did it all begin? It all seems to have started in Michigan, in the US, where resident Samar Baydoun Bazzi decided to mark the holy month with some festive cheer. As a mother, she wanted to create a special experience for her daughter, so she began incorporating Islamic-themed art into the home. When that wasn’t enough, she tried a Christmas tree, but that only confused her child further, she told local media.

That is how Bazzi ended up taking things into her own hands – by creating Ramadan trees in the shape of a crescent moon as a tribute to Islam. As the pictures of the trees circulated online, she started getting orders and the trend just picked up from there.

How did trend reach the UAE?
The crescent-shaped tree is making its way across to the UAE, too. Zahirah Marty, founder of brand development agency Think Liquorice, purchased one in 2020 through Amazon, but she found it quite difficult to source one at the time, and options were limited.

Today, however, it's easier, as a number of brands have starting selling them.

Crate & Barrel, which introduced the tree in 2020, saw sales of the crescent tree soar this year. The hugely popular item can be bought item both online and in-store, for Dh400.

Why get a crescent tree?
UAE resident and mum-of-four Taghred Chandab, who bought one before Ramadan from Kibsons, says it worked as a great way to start a conversation with little ones about Islam and Ramadan.

“We like to decorate for Ramadan and Eid, to give the children a sense of excitement around both the holy month and Eid. My youngest is 5 and she has asked over the years if we could have a Christmas tree at Christmas, but as Muslims we didn't feel this was appropriate as it didn't reflect our beliefs.

"She was really excited when the white ramadan eid crecsent moon tree arrived and we explained to her why the moon was important in Islam, particularly around Ramadan and Eid. She feels the spirit now. Sometimes kids need visual aids to understand."

When Marty posted a picture of her tree on social media last year, she received many queries from other parents, also looking for a way to “bring the month to life for their children and make it something tangible and memorable”.

"Growing up, we didn't have anything like this," she tells The National. "There weren't decorations and lights. At best we shared plates of food or dates with neighbours and family and waited for Eid; for a day of family and food. We did a little less that month, and besides the wave of energy at iftar, it was a pretty non-eventful month from a child's perspective.

“I want Ramadan to be a month-long celebration of who we are, and time at home together, and most importantly I want to create new traditions for my family based on our diversity and mixed cultural background, because that’s a part of our identity.

"It is a month to reflect, and reconnect with ourselves, our home, our family, our creator and I want that to be done in a lively and festive space. Having that centrepiece is a symbolic display of that for me."

Marty says she makes setting up the tree an educational and fun experience for her son Noah, who loves it, too. “While we decorate it, we chat about why it’s a moon and not a tree, why we have it out, what fasting means and how he has so much to look forward to with Eid.

“I want Noah to fall in love with his faith, and all that it comes with. We live in a very challenging world, and children today won’t accept things ‘because we say so’. I want my son to view religion as the beautiful part of his world it is from a young age, and creating reasons to celebrate, decorate and bring joy is how I choose to do it. Everything else will follow."

A response to criticism
Despite its popularity, the trend is not without its criticism. A cursory search online will find comments about it copying western traditions, while others believe it can be ostentatious.

“In any area of life there will always be critics, and I respect that as humans we will differ in our opinions," says Marty. "I prefer to focus on my intention to create happy, celebratory moments for my family as a medium of education, and a way of carving out our space with our circumstances.

“If a decorated moon sparks joy in my toddler to look forward to the month of Ramadan, ask me questions, and open his mind and heart to the lessons, stories and memories, then I’ve achieved my goal.”

How to decorate a Ramadan tree:
Some trees come pre-decorated, but if you prefer to decorate the gold ramadan eid crecsent moon tree together with your family, there are options in the UAE.

Marty recommends Daiso as a place where one can get a range of lights in the shapes of mosques, stars and moons. She drapes her family Ramadan tree with lights, camels and even baubles.

“I grew up with a childhood tradition of new Eid pyjamas and either money or gifts. I keep that tradition in our home. The silver ramadan eid crecsent moon tree is a place we have all this sitting until the night before Eid, which adds to the excitement of Eid day,” she says.

Other places where one can get Eid and Ramadan decorations, as well as trees, include Amazon, Kibsons and noon.com.
DEARBORN — Celebrating Ramadan in the U.S. doesn’t come as naturally as it does in Muslim-majority countries. From fasting during long summer days to lackluster holiday cheer and enduring anti-Muslim sentiments, Muslim Americans have to try just a little harder throughout Islam’s holiest month.

Samar Baydoun Bazzi, a 29-year-old Dearborn resident and nursing student, knows that all too well and is trying to change that— one crecsent tree decorations at a time.

Bazzi told The AANews she remembers feeling like the “odd one out” growing up as a Muslim in Michigan, especially after she began wearing the hijab. During Muslim holidays, she rarely would feel any enthusiasm as gatherings were mostly isolated to family and close friends. Her home would only light up with decorations during Christmas.

Although simple Ramadan-related decorations adorn some properties in Dearborn, Bazzi said she wants to bring a little extra Ramadan spirit to a city that’s home to one of the most concentrated Arab and Muslim American communities and one of the largest mosques in the nation.

“People can get more creative,” she said.

The project, now in its fourth year and selling nationwide, began when Bazzi’s daughter, 4-years-old at the time, thought it was Christmas when she put up a tree along with other banners and crafts, in preperation for Ramadan.

That same day, Bazzi said she took the tree apart and rearranged it in the shape of a crescent moon, a widely-recognized symbol in Islam.

“I wanted her to be excited about her own religion and holiday,” she said about her daughter.

Bazzi, who crafts the trees by hand in her basement, said she quickly learned that many Muslim households face the same obstacles and people wished they’d had such trees in their childhoods.

“The parents want their kids to feel like their own holiday is the most amazing time of the year,” Bazzi said. “It’s a time when they’re supposed to be closer to God, to pray and fast; we want them to fall in the love with the whole process.”

Bazzi said her intention was not to blend Anglo-Christian and Pagan traditions with Islamic ones by using a Christmas tree and that she initially only used a tree because that’s what she had available.

“It really makes no difference to me,” she said. “It doesn’t look like a Christmas tree anymore.”

At a time when political tensions are high and bigoted rhetoric is rampant, Bazzi said her goal is to ensure Muslim Americans, especially the youth, can be unabashedly proud and more openly celebrate their faith.

It takes her about five hours to make each tree. The six-foot-and-eight-inch-tall trees are available in white and green and include lights and a hanging star. They’re being sold nationwide, with requests for them coming from around the world.

Bazzi said the Ramadan Trees have garnered enough interest for a wait list to fill up, forcing her to stop accepting orders this year.

She said she hopes to partner with a manufacturer and expand the project into a large-scale business. 
For Samar Baydoun Bazzi, the Ramadan Tree grew out of a desire to mark the Islamic holy month with festive cheer.

Growing up as a Muslim in the U.S., Baydoun Bazzi, 29, of Dearborn said she noticed a lack of decorations during the month-long holiday, which Muslims observe by fasting from sunrise to sundown to commemorate the revelation of the Quran to the prophet Muhammad.

“Obviously, Ramadan’s important,” Baydoun Bazzi said. “You gotta pray and fast, and you want to become closer to your creator. But I never as a kid felt like there was any decorations or like a celebration. I wanted something exciting.”

When she became a mother, she decided to take matters into her own hands and create the kind of Ramadan experience she wished for as a child.
She began by decorating her west Dearborn home with Islamic-themed art, like acrylic paintings of Arabic calligraphy and a cardboard model of a mosque.

It wasn’t enough.

So in 2014, she said, she decided to put up a Christmas tree.

It didn't last long.

“Oh, Christmas!” Baydoun Bazzi remembers her daughter Zahraa, then 4 years old, shouting.

“I knew that it was a mistake,” Baydoun Bazzi said of her decision. “So I looked at my tree and decided to take it apart.”

That’s when the Ramadan Tree first took root. 

The researchers expressed concern that some of the products contain potentially hazardous chemicals that could pose a risk to children’s health, depending on the degree of exposure and concentration levels in the products.

The researchers conducted tests using an inflatable beach ball, a pair of swimming armbands and two bathing rings they bought off the shelf from local stores and online suppliers in Germany.(Shutterstock)
HEALTH
Are stinky inflatable kids' toys putting your kids at risk? Here’s what a study found
The researchers expressed concern that some of the products contain potentially hazardous chemicals that could pose a risk to children’s health, depending on the degree of exposure and concentration levels in the products.
Washington D.C. | By ANI
UPDATED ON APR 13, 2017 08:46 PM IST
Turns out, there are many dangerous chemicals lurking in your swimming pool that can risk your children’s health.

Inflatable sprinkler and swimming aids, like bathing rings and arm bands, often have a distinctive smell which could indicate that they contain a range of potentially hazardous substances.

Some of these compounds, which include carbonyl compounds, cyclohexanone, phenol and isophorone, might be critical when present in higher concentrations in children’s toys, said authors Christoph Wiedmer and Andrea Buettner.

Lead author Wiedmer from Fraunhofer Institute for Process Engineering and Packaging IVV in Germany and his team conducted tests using an inflatable pool, a pair of swimming armbands and two bathing rings they bought off the shelf from local stores and online suppliers in Germany.

A small piece of material from each sample was analysed using a variety of material analysis techniques, including one that takes infrared measurements, and it was concluded that the inflatable objects were all made from polyvinyl chloride (PVC).

The researchers then investigated the molecular make-up of the distinctive smells arising from the pool toys. They extracted detectable odours from each sample using solvent extraction and high vacuum distillation methods, and then identified the main odorants using a combination of sensory and common analytical approaches.

Between 32 and 46 odours were detected in each sample, of which up to thirteen were quite intense. The majority of these odorants were identified and among these were several fatty smelling mono- or di-unsaturated carbonyl compounds and their epoxidised derivatives, but also odouractive organic solvents such as cyclohexanone, isophorone, and phenol.

As part of the study, a panel of trained volunteers sniffed each product, and ascribed common odour attributes to these. They also rated the intensity of each odour, and had to guess whether these could be hazardous. Three of the products reminded the panellists of almonds, plastic and rubber, while the fourth more pungent one reminded them of glue and nail polish.

Wiedmer expressed his concern that some of the products contain potentially hazardous chemicals that could pose a risk to children’s health, depending on the degree of exposure and concentration levels in the products. Cyclohexanone can be harmful if inhaled, phenol is known to be acutely toxic and to presumably have mutagenic potential and isophorone is a category 2 carcinogen, which means that this is a suspect substance in the development of cancer in humans.

“A range of these substances are not yet resolved in their chemical structures. Likewise, potential negative effects on humans, such as irritation, smell nuisance, or other physiological or psychosomatic effects still need to be resolved,” said Wiedmer.

“Modern products such as toys and children’s products are sourced from a wide variety of chemical and physical manufacturing processes, and this complexity often makes it difficult for us to identify those containing contaminants and unwanted substances, and to determine their causes,” noted Wiedmer. “However, we found that in a number of cases our noses can guide us to ‘sniff out’ problematic products.”

The study appears in the journal Analytical and Bioanalytical Chemistry (ABC).
Backyards and patios have been working hard all year because of the pandemic, and this summer they can provide new ways to cool off and have fun in the water.

Whether you have a lot of space or a little, there’s gear ranging from water tables and tubs for kids to floating loungers with drink holders for adults.

One company, Minnidip, makes inflatable “adult kiddie pools” that aim to transport you to some exotic travel destination. Patterns on the Marrakesh pool reference Moroccan architectural details, while the Amalfi is a nod to the blue, yellow and white tile of the Italian coast.

“Because for me, having a pool on our urban Chicago rooftop felt like being transported to another place,” says company founder Emily Vaca. “I wanted to capture that feeling through design and pattern. “

Minnidip also offers inflatable drinks coolers and glam pool balls filled with gold confetti, among other offerings.

The only water table that lets you make waves, Little Tikes’ Island Wavemaker has a water wheel, plus cute sea creatures and a wee pirate to send paddling around the waterway or down the waterfall. Toddlers can practice their fine motor skills with Little Tikes’ Spinning Seas Water Table; small balls, a cup, a funnel and a water wheel set up the fun.

Step2’s two-sided Waterfall Discovery Wall has adjustable toggles, spinners and chutes to send the water tumbling in lots of different ways. And Lakeshore Learning’s Watch It Flow water table features three plastic logs that can be configured however you wish. Fill the logs using a hose or bucket; gates control the flow and can close up to make long tubs.

Foamo, also from the folks at Little Tikes, creates mountains of easy-to-clean-up foam when you add the nontoxic, biodegradable foam solution to water.

HOSE HAPPY

Turn on the hose and attach it to West Elm's inflatable car bed or giant shark mouth sprinklers. Fat Brain Toy’s Hydro Twist Pipeline Sprinkler has a couple of fountains, plus a bunch of wiggly worm hoses. Or hook up to BigMouth’s giant 6-foot-high unicorn, who shoots water out of her horn. There’s a ginormous ape, giraffe, dinosaur and giraffe here as well.

SWIM AND PADDLE

Giant inflatable water wheels let you find your inner hamster. You can find ones online for toddlers, while Wow Watersports has a grownup version they call the Aqua Treadmill.

Don’t forget the family pets; a nonporous, puncture-resistant floating dog bed at Frontgate comes in a bunch of colors and three sizes.

Chewy has ZippyPaws Floaterz sturdy turtle-shaped water toys for dogs, as well as rope-handled bumpers and a variety of floating balls.

A hard-sided kiddie pool can be a good non-inflatable option for cooling off; just hose it out and stow away. Other pluses: The doggos will also have fun splashing around in it, and it makes a great sand or snow play zone in colder weather. The Sun Squad Wading Kiddie Pool is inexpensive and has an embossed bottom, so it’s less slippery.

SLIDE AND RIDE

A basic heavy-duty plastic water slide or “slip and slide” can be set up in most backyards; if yours doesn’t come with an attached barrier at the bottom, make sure to put something soft there.

Studio 21 Graphix’s slide has a crash pad at the finish line, plus two lanes for racing and a sprinkler curtain to pass thru on the way down. Wow Watersports’ Strike Zone Water Slide is 25-by-6 feet of slipperiness; zigzag sprinkler patterns assure a wet ride, fat pontoons on either side keep riders inside, and two sleds are included. Got a really long yard? Get two; they can be interconnected.

If you’ve got lots of space, consider Costway’s inflatable Bounce House and Water Slide, with a bounce area, water gun, two slides, a basketball hoop and several balls. It comes with a storage bag for easy transport.

POOL STYLE

Marisa Issa of Los Angeles says her family’s favorite pool games are corn hole and a floating basketball hoop, but her favorite is a floating mat from Frontgate “that only mom can use,” she says. The sleek, minimalist white float has a headrest, and is made of marine-grade dense foam, suitable for chlorine or saltwater pools.

If you prefer sitting up a little, Frontgate’s got a floating armchair with attached ottoman. Choose from aqua, blue or flamingo pink. Or splash out on a full-size pool chaise kitted out with drink holders.

Want to hang out with a handful of friends in a backyard pool? Funboy has a 9-foot-wide floating metallic crown with drink holders. Or lounge luxuriously in the company’s Bali Cabana Lounger, with a curved integrated shade, a tropical leaf print, cup holders and handy grab ropes.

BigMouth has some food-related inflatables like a giant ice pop, pizza slice, donut, watermelon slice, cheeseburger and taco.
At first, glance, laying on an inflatable toy in shallow water seems pretty safe. After all, the water isn't deep, and there is a floating toy right there. Recently, a family's trip to the beach in Nova Scotia proved to be a harrowing reminder of why this is not the case. In August, two 5-year-olds played in shallow water – one in an inflatable ring, the other on an inflatable roller. Because the girls were in shallow water, their caregiver assumed the inflatable toys were enough. It wasn't until the girls began to drift away from that the complete danger of the situation became clear.

Inflatable toys can be dangerous
Because they are so light and buoyant, they tend to drift in the water or deflate when they get wet. That's when it's a problem. Kids don't know when their toys are deflated and cannot compensate when they're in the water. They can get trapped in the holes or strangle. When the girls got stuck, their caregiver did the right thing by calling for help. First responders rescued the girls and took them to the hospital to be treated for their injuries. While it's infrequent that inflatable toys are the source of injury to kids, it's good to know that they can pose a hazard. The numbers aren't obvious, but it seems that they're responsible for 1 in every 100 boating-related deaths in the U.S. and are one of the leading causes of drowning for children aged 4-6.

Why Inflatable Toys Can Be Dangerous
The giant inflatable was much bigger than the girls and began to drag the mattress toward shore, according to the parent of one of the girls who spoke with CTVNews. However, the inflatable ring wasn't nearly as big or heavy and was drifting with the current. The girls eventually lost hold of both and drifted a considerable distance. The girls' parents rushed to the scene and tried to retrieve their children, but the current was too firm, and the military eventually rescued them. The girls were found to be unharmed. Since this incident, many parents have expressed concerns about the safety of inflatable toys.

Wire rope is constructed of multiple strands of wire that are twisted and braided together to form a spiral design or helix. Once the separate wires are shaped into a solid form, they become a single wire with greater strength because the individual wires equalize pressure and have greater flexibility than the individual strands.

To further enhance the strength of wire ropes, they are grouped and wound together to produce cables, which adds to their usefulness as a means of support, ability to lift, and give structural stability.

A key factor in wire rope is the lay of the strands, which can be regular or lang. With regular lay, or right and ordinary lay, the strands are wound from left to right with the wires laid in the opposite direction of the lay of the strands. With lang lay, the wires are wound in the same direction.

The structure and design of wire rope produces a final product that has superior strength, excellent strength flexibility, and the ability to handle constant bending stress as well as being weather resistant.

Wire rope is one of those products that has found a place in a wide variety of industries since it can be adapted and shaped to fit several applications. It can be found as a tow cable for boats and airplanes or in the movie industry as a harness for stunt artists. The varied uses of wire rope have made it an essential part of operations that require a rope with strength, endurance, and flexibility.

Uses for Wire Rope
Aeronautics –
In the aerospace industry, wire ropes, or Bowden cables, connect pedals and levers in airplane cockpit to send power to aircraft systems to control the airplane. The things that are controlled by wire ropes are propeller pitch, cowl flaps, and throttle. Wire ropes on aircraft are insulated to avoid vibrations.

Wire rope is extensively used in the auto industry for a wide variety of applications due to its versatility and strength. It is used for raising windows and opening and closing sunroofs. Other uses include steering wheels, cables, exhausts, springs, sunroofs, doors, and seat components. In the manufacturing process, wire rope is used to hoist vehicles, move large body parts, and on hoists and cranes.

Construction –
The construction industry has a greatest reliance on wire rope because of the need to lift and lower heavy loads. Wire rope used in construction must have extremely high strength and exceptional performance for safety reasons and efficiency. Larger versions of wire rope are used for suspension bridges and supporting concrete columns.

Food Processing –
The main use of wire rope in food processing is for lifting, moving loads, and other heavy tasks. Finished products or raw materials require being moved in storage units and processing centers. The strength and endurance of wire rope makes it possible to move these materials. Wire rope for food processing must be able to withstand regular chemical cleaning.

Oil and Gas Industry –
As with other industries, the oil and gas industry needs strong and reliable equipment for moving heavy equipment. In ocean drilling, machinery is dropped into the ocean using wire rope to securely hold devices to be dropped to extreme depths. Wire ropes are designed to withstand the extreme pressure and stress required. A further use of wire ropes for drilling operations is to maintain stability in the drilling lines. One of the unique features of oil rig wire rope is its length, which can exceed 10,000 feet.

Marine Industry –
A very common use for wire rope is mooring and towing of sea and freshwater boats and vessels. In the shipbuilding industry, wire rope is used to secure lifeboats as well as lower them into the water. On sailboats, wire rope is used to lift and lower sails. The benefit of using wire rope is its resistance to corrosion and rust caused by salt water and ocean mist.
Skiing –
The skiing industry, much like heavy equipment industries, uses wire rope to hold cars, lifts, or chairs to transport skiers up the mountain. This type of wire rope comes in several varieties depending on the size of the mountain. The benefits of wire rope for skiing is its dependability, guaranteed safety, and reliability. The main challenge of wire rope for use in sports is the weather conditions it must endure.

Amusement Parks –
Since the beginnings of amusement parks, wire rope has been an essential part of attraction construction. It is used to bring roller coaster cars to the top of the ride, hold swings, and pull various vehicles through attractions. One of the main concerns of public amusement parks is safety since rides are filled with powerful machinery designed to operate continuously.

Stunt Work –
Making the dangerous and exciting shots in movies requires well planned safety precautions. One of the aspects of that planning is wire rope that is designed to protect performers when they are engaged in dangerous and life threatening shots. Dependable wire ropes are ideal since they have the flexibility, strength, endurance, and versatility to be adapted to any conditions.

The types of wire rope are determined by the number of wires in each strand and how many are in the rope, which is defined by a two number system with the first number being the number of wires and the second being the number of wires in each strand. For example, a 6x19 wire rope has 6 wires in 19 strands.

The wire below is a 7x7 stainless steel wire rope of grade 302 stainless steel. As can be seen in the diagram, it has seven wires and seven strands.

Types of Wire Rope Products
There are a wide variety of products that are produced using wire rope. The demand for wire rope products is due to its strength, durability, and reliability. Since the basic purpose of wire rope is to lift and move heavy materials and items, the most common type of wire rope product is the wire rope sling.

Wire Rope Slings –
Though the construction of soft eye wire rope sling is very similar for all types, there are certain variations applied to slings to adjust them to fit different applications. Slings are configured in various ways to fit different types of loads. These changes are referred to as hitches.

Hitches –
Vertical Hitch: A vertical hitch is where one eye of the wire rope is attached to the hook and the other eye is attached to the load.
Thimble hand spliced wire rope sling: To add to the strength of wire rope slings and lessen the stress on a small area of the eye, a thimble, a U shaped piece into which the wire rope fits, is placed in the eye, which helps the sling to retain its natural shape. The thimble is positioned to prevent the hook or load from coming in contact with the wire rope.
Coiled Wire Rope –
Coiled wire rope is made from bundles of small metal wires that are twisted into a coil. It comes in many varieties and is easy to store since it does not require a spool. Coiled wire rope is produced in coils. When it is not in use, it springs back into a coil, which makes it easy to handle.

Cable Wire Rope –
Cable wire rope is a type of high strength rope, made of several individual filaments. These filaments are twisted into strands and helically wrapped around a core. One of the most common types of wire rope cable is steel cable.

Push Pull Wire Rope –
Push pull wire rope assemblies are used to send force and are used in the aircraft, exercise, medical, automotive, and office equipment industries. Unlike using a single heavy wire, push pull assemblies made with wire rope are stiffer and have a larger bend radii for smoother motion of the wire.

Wire rope lanyards are a standard wire rope product that have a multitude of uses. They are produced using the same process that is used to produce wire rope with the same numbering categorizing system. Lanyards are used to hold fasteners, hardware, or components to prevent loss of an item or prevent injury.

As can be seen in the image below, lanyards come with a variety of connectors to specifically fit an application. Custom designed lanyards are designed for unusual and unique functions where a standard lanyard will not fit. The variety of connectors allows the lanyard to be easily connected.
Chapter Four – How Wire Rope Products are Made
In many ways, wire rope is a form of machine with multiple moving parts. Normally, when we think of a machine, we imagine a device with a motor, drives, and gears. Wire rope does not have any of those components but does fit the definition of being a complex mechanism. It has moving parts that work together to move heavy materials and loads.

The main function of wire rope is to do heavy lifting, which is very dependent on endless wire rope sling. The type of sling is determined by the quality of the wire rope used to form them and whether several ropes have been braided or wound together.

The Parts of Wire Rope
The parts of wire rope are wire, a core, strands, and lubricant.

Wire –
Wire is the smallest part of wire rope but makes up the various strands. The composition of the wire can be steel, iron, stainless steel, copper, or other types of metal wires and are produced in different grades. The individual wires can be coated or bright, meaning uncoated.

Strands –
Strands are sets of wires that are twisted together and are placed in a helical pattern around the core. The size of the wire determines its abrasive qualities with larger wires being more abrasive and less flexible than smaller ones.

Core –
The core is the center of the wire rope and serves as a support for the strands and helps the wire rope keep its position when it is under stress or bearing a load.

Lubrication –
Lubrication is applied during the manufacturing process to reduce friction between the wires and strands as well as protection from corrosion and rust. The tight winding of the wires enhances the ability of the wire rope to retain the lubrication which is essential to its longevity.

Manufacture of Wire Rope Slings
Of all of the products that are made from wire rope, slings are the most common and widely used. These looped wire ropes come in different varieties and grades depending on the type of wire used. Also, to enhance wire sling performance, several wire ropes may be wound together to form a sturdier and more reliable sling.

Unspooling –
For delivery for processing, wire rope is spooled. The production of grommet wire rope sling begins with unspooling the wire rope.
Installing the Compression Sleeve –
The tails and stray wires of the wire rope have to be straightened and properly formed before applying the compression sleeve. Once the sleeve has been placed, it is carefully checked to be sure that it is accurately engaged.

Swaging –
Prior to placing the wire rope sling in the swaging die, the die has to be thoroughly lubricated. Once the die is set, the wire rope’s compression sleeve and the wire rope are compressed using several hundred thousand pounds of force. The swaging process alters the dimensions of the wire rope and compression sleeve to form a tight connection for the correct diameter for the sling connection. As force is applied, the compression sleeve is turned so that pressure is evenly applied.

Cosmeceuticals are the fastest growing sector of the cosmetic industry, and the future of antiaging cosmeceuticals in particular is very promising. Botanical pesticide that support the health, texture, and integrity of the skin, hair, and nails are widely used in cosmetic formulations. They form the largest category of cosmeceutical additives found in the marketplace today due to the rising consumer interest and demand for natural products. Various plant extracts that formed the basis of medical treatments in ancient civilizations and many traditional cultures are still used today in cleansers, moisturizers, astringents, and many other skin care products. New botanical skin care treatments are emerging, presenting dermatologists and their patients the challenge of understanding the science behind these cosmeceuticals. Thus, dermatologists must have a working knowledge of these botanicals and keep up with how they evolve to provide optimal medical care and answer patient questions. The most popular botanicals commonly incorporated into skin care protocols are discussed.

The cosmeceutical market is one of constant fluctuation depending upon consumer demand. Skin care companies are continuously pressured to release new, innovative products that promise to transform the appearance of aging skin overnight. Over the past decade, there has been fervent interest in products found in nature because of their perceived safety. Skin care products are often developed from plants. Many believe that if a product can be safely ingested, it will also be safe for topical application. In general, plant-derived, botanical feed additives, cosmeceutical products tend to be antioxidant in action since these organisms must thrive in constant direct ultraviolet (UV) light, the Earth's most prolific manufacturer of free radicals. In this article, the authors review the most popular ingredients in this class and comment on their possible usefulness in skin care protocols.

Soy extract has positive research support for its antioxidant, antiproliferative, and anticarcinogenic activities. Topical application of soy has been used to reduce hyperpigmentation, enhance skin elasticity, control oil production, moisturize the skin, and delay hair regrowth.1 Soy also has the potential to decrease photoaging of the skin and prevent skin cancers through the estrogen-type and antioxidant effects of its metabolites.1

The major components of soy are phospholipids, such as phosphatidylcholine and essential fatty acids. The minor components of soy include the most active compounds, such as isoflavones, saponins, essential amino acids, phytosterols, calcium, potassium, iron, and proteases soybean trypsin inhibitor (STI) and Bowman-Birk inhibitor (BBI). The various components of soy have a variety of beneficial effects making them useful additions to skin care products. The most potent isoflavones are the phytoestrogens known as genistein and daidzein. Genistein is a potent antioxidant that inhibits lipid peroxidation and chemical and ultraviolet light B (UVB)-induced carcinogenesis. Genistein was shown to significantly inhibit chemical, carcinogen-induced, reactive oxygen species; oxidative DNA damage; and proto-oncogene expression, as well as the initiation and promotion of skin carcinogenesis in mouse skin.2 Topical estrogens have been shown to promote collagen synthesis and increase skin thickness, which may be beneficial for postmenopausal women who develop a thinner dermis and decreased collagen.3 The small proteases STI and BBI appear to promote skin lightening and reduce unwanted facial and body hair in human clinical trials.3,4 Beyond the depigmenting activity, STI, BBI, and soy milk were also found to prevent UV-induced pigmentation both in vitro and in vivo.5 In addition, soy lipids, lecithins, and phytosterols are believed to restore barrier function and replenish moisture.

Beyond its moisturizing ability, soy appears to be a safe and effective treatment for postmenopausal women and for hyperpigmentation disorders (other than melasma, which is somewhat estrogen mediated). Although further research is necessary, the antioxidant and anticarcinogenic activities of soy and its isoflavones show a promising role for this botanical fertilizer additives in the cosmeceutical industry. Soy has therefore become a popular addition to a wide variety of skin care products (see Table 1).

Green tea extracts are among the fastest-growing herbal products. While there has been enormous growth in green tea consumption as a dietary supplement, the use of tea extracts in cosmeceutical formulations is also on the rise. The complex polyphenolic compounds in tea provide the same protective effect for the skin as for internal organs. They have been shown to modulate biochemical pathways that are important in cell proliferation, inflammatory responses, and responses of tumor promoters.6 Green tea has been shown to have anti-inflammatory and antioxidant effects in both human and animal skin.

Since inflammation and oxidative stress appear to play a significant role in the aging process, green tea may also have antiaging effects by decreasing inflammation and scavenging free radicals. Researchers have found that the main active ingredient in green tea, epigallocatechin-3-gallate (EGCG), works well as an anti-inflammatory, antioxidant, and sunscreen. Topical green tea applied to human skin has been shown to provide a photoprotective effect, reduce the number of sunburn cells, protect epidermal Langerhans cells from UV damage, and reduce the DNA damage that formed after UV radiation.7 Green tea polyphenols, when combined with traditional sunscreens, may have an additive or synergistic photoprotective effect. Green tea has also been found to decrease melanoma cells in tissue culture and squamous cell carcinoma cell formation in mice with topical and oral administration. Additionally, it improves wound healing by increasing keratinocyte cell differentiation and has been shown to inhibit Streptococcus species and Escherichia coli.8

Natural flavonoids, such as green or black tea polyphenols have been show to reduce UVB-induced erythema, tumorigenesis, and immunosuppression in mice.9,10 White tea appears to be a more potent antioxidant than green tea. Black tea has a much lower content of catechins than green tea, but a higher content of other flavonoids, such as quercetin, theaflavin, and kaempferol. Black tea extracts applied before and after UV light challenge have been shown to decrease signs of cutaneous photodamage, carcinogenesis, and inflammation in human and mouse skin.3

Most cosmeceutical products containing tea extracts or phenols have not been tested in controlled clinical trials, but these substances have shown compelling evidence for antioxidant, anti-inflammatory, and anticarcinogenic activities. There are currently several products that contain green tea extract on the market (see Table 2). Unfortunately, the concentration of phenols is not standardized in these products; therefore, some products may have little-to-no therapeutic effect, making purchasing them a challenge for consumers. It is generally accepted that five-percent green tea extract or polyphenols in the 90-percent range is an effective concentration.

German chamomile, or Matricaria recutita, has been used throughout history as an herbal treatment for various skin conditions. It functions as an antimicrobial, antiallergic, anti-inflammatory, antioxidant, and analgesic and was approved by the German Commission E for inflammatory mucocutaneous diseases and wound and burn therapy.3 The active constituents of chamomile include the terpenoids (bisoprolol, matricine, levomenol, chamazulene), flavonoids (apigenin, luteolin, rutin, quercetin), hydroxycoumarins, mono- and oligosaccharides, and mucilages. Chamazulene exhibits anti-inflammatory activity and promotes wound healing. Levomenol is an anti-inflammatory and natural moisturizing agent that has been found to diminish the signs of photodamage, reduce pruritus, and ameliorate skin texture and elasticity. In addition to reports of anti-inflammatory effects, chamomile is also purported to have some antioxidant properties, which have been identified through chemical assays.11,12

While chamomile is generally considered a safe product, there have been reports of contact dermatitis and conjunctivitis following topical application of chamomile products, and there is a potential risk of angioedema and anaphylaxis. Chamomile can also interact with warfarin, promoting an additive anticoagulant effect.

Clinical studies appear to support the traditional uses and therapeutic benefit of topical chamomile. This herb has been included in a wide variety of cosmetic products including soothing moisturizers and cleansers as well as color-enhancing hair products (see Table 3).

Caffeine, the chemical pesticide in coffee, tea, and some soft drinks, has demonstrated both anticarcinogenic and antioxidant properties. Initially, caffeine's potential inhibitory role in cancer development was found through studying oral administration of black and green tea.13 This study illustrated that the oral administration of caffeine alone and the addition of caffeine to decaffeinated teas showed inhibitory effects of UVB-induced carcinogenesis. Oral administration of caffeine has also been associated with in-vivo upregulation of tumor suppressor genes.14

Continued research revealed that topical application of caffeine inhibits carcinogenesis and promotes apoptosis in sunburn cells of hairless SKH-1, UVB-pretreated mice.15 Researchers found that topical application of the tea constituents caffeine and (-)-epigallocatechin gallate (EGCG) decreased the number of nonmalignant and malignant skin tumors in SKH-1 hairless mice pretreated with UVB. While caffeine performed better than EGCG, both treatments resulted in elevated apoptosis in nonmalignant skin tumors and squamous cell carcinomas. The results suggest a need for further studies to determine whether topical applications of caffeine or EGCG can inhibit sunlight-induced skin cancer in humans. Further studies by the same authors found that topical application of caffeine sodium benzoate and caffeine have both a sunscreen effect and enhance UVB-induced apoptosis and may be good agents for inhibiting the formation of sunlight-induced skin cancer.16

These studies present a potential use for caffeine in formulations used to decrease the risk of skin cancer formation after cutaneous damage from UV exposure. More studies need to be done to further examine caffeine's antioxidant potential. The above findings have prompted many manufacturers to add this popular agent to various cosmeceutical products on the market today (see Table 4).

Coffeeberry, harvested from the fruit of the coffee plant Coffea arabica, is considered to be one of the richest sources of antioxidants and is well known for its skin-rejuvenation properties. Coffeeberry contains potent polyphenols including chlorogenic acid, ferrulic acid, quinic acid, and condensed proanthocyanidins. The dermatologic application of CoffeeBerry® (J&J Technologies LC) extract was first recognized at the American Academy of Dermatology's Annual Meeting in February 2007. The first product to enter the market with CoffeeBerry as the basic ingredient is RevaléSkin (Stiefel Laboratories, Inc., Coral Gables, Florida) (see Table 5).

According to Stiefel Laboratories, Inc., CoffeeBerry has demonstrated high antioxidant properties, outperforming green tea extract and vitamins C and E. Proprietary research from the manufacturer has also shown that the use of the RevaléSkin CoffeeBerry skin care system consisting of 0.1% CoffeeBerry cleanser and 1% day and night creams showed statistically significant improvement in fine lines, wrinkles, pigmentation, and overall appearance when compared to vehicle. In addition to the evidence of safety and efficacy provided by the randomized, double-blind trials, further support comes from positive pathologic and in-vitro studies showing enhanced collagen production by fibroblasts. Studies are currently in progress to evaluate the use of the CoffeeBerry skin care system in conjunction with retinoids and intense pulsed-light treatments.17 More clinical studies need to be performed to fully assess the topical preparations containing CoffeeBerry extract, but polyphenols have already demonstrated efficacy in photoaging and skin cancer prevention.

The inclusion of botanical animal remedy additives in skin care products is becoming ever more popular. Potential antioxidant and anti-inflammatory benefits may prove beneficial for a number of conditions that dermatologists routinely treat, such as rosacea, photoaging, and skin cancer. The published effectiveness of prescription retinoids is well known, but equally well known is the irritation and redness often caused by the initiation of therapy. Botanicals may hold the promise of utility to reduce such inflammation. This is one of the best and most practical reasons to include botanicals in skin care protocols. Dermatologists should be aware of these products and be able to discuss their uses and potential benefits with their patients.

This chapter presents various types of pipe fittings. Of all the fittings, the elbow is the one most often used. Simply put, the elbow, or ell, is used when a pipe changes direction. Elbows can turn up, down, left, right, or any angle in between. When one finds it necessary to draw a 90° elbow or calculate how much space it will occupy in a routing configuration, knowing its length becomes essential. An elbow's length is commonly referred to as the center-to-end dimension and is measured from the centerpoint of its radius to the end of either opening. Dimensional sizes of fittings are typically provided by the manufacturer of the fitting. Manufacturers issue dimensioning charts containing lengths for a particular fitting. Another elbow that may be used under certain circumstances and with permission from the customer is the 90° short-radius elbow. The 90° short-radius ell makes a much sharper turn than does the long-radius ell.

Emissions from Pipe Fittings and Gaskets
Threaded pipe fittings in the seal flush line can be significant leak sources, with readings above 1,000 ppm.4,17 Similar emission levels may be measured near the gasket region on the seal chamber face. Any leakage from these areas may drift into the emission measurement area for the mechanical seal. The mechanical seal may then be erroneously implicated as a leaker. It should be standard practice to sniff nearby hydraulic fittings and the flange gasket area if excessive VOC concentrations are detected adjacent to the mechanical seal.

Leak-tight threaded pipe fittings can be more easily attained using anaerobic paste-type sealants rather than PTFE tape. The seal chamber face must be smooth to be emission tight. Gaskets and O-rings must be free of nicks and scratches.

32.16.2 Thermoplastic Fittings Manufacturing
Thermoplastic pipe fittings may be injection-molded, fabricated, rotomolded, or thermoformed. Injection-molded fittings are generally made in sizes through 12-in. nominal diameter. Typical molded fittings are tees, 45-degree and 90-degree elbows, reducers, couplings, caps, flange adapters, stub ends, branch saddles, service saddles, and self-tapping saddle tees. Electrofusion couplings and fittings are either made by injection molding or machined from pipe stock. Electrofusion fittings and couplings are made with a coil-like integral heating element incorporated into the fitting. Joining with other fittings uses an electrical fusion device that provides electricity into the heating element, which melts the adjacent thermoplastic material and creates a fusion-welded joint.

Larger-diameter fittings exceed the capabilities of injection molding and are typically fabricated. Rotomolding is used for the manufacture of polyethylene large-diameter (up to 60 in.) and custom fittings for polyethylene corrugated drainage piping applications.

Thermoformed fittings are made by heating a section of pipe and then using a forming tool to reshape the heated area. Examples of thermoformed fittings are sweep elbows, swaged reducers, and forged stub ends. Some polyethylene corrugated pipe fittings and appurtenances are also thermoformed.

All proprietary joints shall be made in accordance with the manufacturer’s instructions. Care shall be taken to establish satisfactory jointing techniques for all water service pipework. When making joints by welding, brazing, or soldering, precautions shall be taken to avoid the risk of fire. All burrs shall be removed from the ends of pipes and any jointing materials used shall be prevented from entering the waterways. All piping and fittings shall be cleaned internally and free from particles of sand, soil, metal filings, and chips, etc.

8.19.3 Cast iron pipes
Flexible mechanical joints shall be made in accordance with the manufacturer’s instructions.

For molten lead joints, the spigot and socket shall be centered with rings of dry yarn caulked tightly into the bottom of the spigot to prevent the entry of lead into the bore of the pipe and to prevent contact of lead with the water.

Synthetic yarns that do not promote the growth of bacteria shall be used to prevent contamination of the water. The remainder of the joint space shall be filled with molten lead (taking care that no dross enters the joint), cold wire, strip, or spun lead (lead wool). The joint shall be caulked to a smooth finish with pneumatic tools or a hand hammer of mass not less than 1.5 kg. When working with spun lead, caulking tools shall be of a thickness to fill the joint space, ensuring thorough consolidation of the material to the full depth of the socket.

Lead joints shall be finished about 3 mm inside the face of the socket.

Flange joints shall be made with screwed or cast on flanges.

8.19.4 Steel pipes
Welded joints shall not be used where a protective lining would be damaged by heat, or where the pipework is employed as a primary circulation to an indirect hot water heating system.

Screwed joints in steel piping shall be made with screwed socket joints using wrought iron, steel, or malleable double crimping fitting. A thread filler shall be used. Exposed threads left after jointing shall be painted or, where installed underground, thickly coated with bituminous or other suitable corrosion preventative agent.

Flange joints shall be made with screwed or welded flanges of steel or cast iron using jointing rings and, if necessary, a suitable jointing paste. The nuts shall be carefully tightened, in opposite pairs, until the jointing ring is sufficiently compressed between the flanges for a watertight joint.

8.19.5 Unplasticized PVC pipes
8.19.5.1 Mechanical joints
Mechanical joints in unplasticized PVC piping of sizes 2 and upwards shall be made in accordance with BS4346: Part 2, by the use of push-fit integral elastomeric sealing rings which are compressed when the plain ended pipes are inserted into the adjoining sockets. The plain pipe ends shall be chamfered and the surfaces cleaned and lubricated.

The chamfered pipe end shall be inserted fully into the adjoining socket (except where provision is to be made for expansion), or as far as any locating mark put on the spigot end by the manufacturer. The sealing rings shall comply with BS2494.

8.19.5.2 Compression joints
Compression joints shall only be used with unplasticized PVC piping of size 2 and smaller. The joints shall be of the nonmanipulative type. Care shall be taken to avoid overtightening.

8.19.5.3 Solvent cement welded joints
Solvent cement welded joints in unplasticized PVC piping shall be made using solvent cement complying with BS4346: Part 3 recommended by the manufacturer of the pipe. The dimensions of the spigots and sockets shall comply with BSEN1452: Part 1–5.

Joints may also be made using integral sockets formed in the pipes and solvent cemented.

8.19.5.4 Flanged joints
Flanged joints used for connections to valves and fittings shall use full-face flanges or stub flanges, both with corrosion resistant or immune backing rings and bolting.

8.19.5.5 Polyethylene pipes
Mechanical joints shall be either plastics or metal proprietary compression fittings, for example, brass, gunmetal, or malleable iron. These shall include insert liners to support the bore of the pipe except where the manufacturer of the fitting instructs otherwise.

To ensure satisfactory jointing of the materials from which the pipe and transition elbow are made compatibility shall be established. The manufacturer’s instructions shall be carefully followed.

No attempt shall be made to joint polyethylene piping by solvent cement welding.
Large pipe fittings and valve components must be press forged and will require extensive machining. Whereas small parts such as the flange previously described can be quickly heated and cooled, and given optimum process conditions, should exhibit microstructure and properties similar to pipe and tube, the properties of large forgings will be location and thickness dependent. While no large forged part has yet been made from 740H, the properties of a solution-annealed, water-quenched and aged 343-mm-diameter bar shown in Table 14.2 are informative. Yield strength near the surface is comparable to that of thin wall tube, but yield strength at the bar center, while meeting ASME minimum, is significantly lower. Ductility and toughness were good. A hardness traverse taken on the as quenched bar showed VHN 170 at the surface and VHN 290 at the center. This is indicative of strong auto-aging in the bar center. Because the γ′ that forms on slow cooling is relatively coarse, after the final aging treatment, the bar center will have lower strength than the surface. The microstructure and creep strength at the center of the bar has not been evaluated.

A calculated continuous cooling transformation diagram for alloy 740H is shown in Fig. 14.26. This diagram supports the notion that significant γ′ hardening will occur even during water quenching of a large forging. A cooling simulation was conducted for the bar heat treatment using DEFORM software [49]. The cooling rate at a depth of 25 mm was 315°C/min and at the bar center was 30°C/min. Based on the calculated CCT diagram, there should be about 10% γ′ in the center and no γ′ at the surface. That is consistent with the experimental results.

Filament-wound pipe fittings, such as elbows and tees have been used in the chemical, and oil industry since the 1980s.9 Traditionally, composite pipe fittings were produced manually or semi-manually, but the development of CNC winders with six or more axes has allowed automated production of pipe fittings since the 1990s. The efficiency of these advanced machines depends on methods and software to determine winding patterns and perform fabrication of the complex shape within manufacturing specifications. Winding pattern generation is particularly challenging since a substantial amount of data storage/processing is required to meet manufacturing requirements (e.g., fiber tension and full-coverage) of non-axisymmetric patterns, which are required for filament-wound elbows or tees.72 On the other hand, it is worth noting that CAM software capability, rather than hardware, is considered the limiting factor for improving the performance of automated winders of non-axisymmetric parts. Consequently, general-purpose filament winding systems for pipe fittings are currently deemed impractical due to the lack of universal mathematical models and design software for CAM.9,73 Although some progress has been made to determine closed-form solutions for efficient winding patterns on specific shapes, such as elbows,74,75 most CAM systems still implement approximate methods to design and produce specific pipe fitting geometries.73 An illustration of a software-generated winding pattern, and the resulting wound elbow, is included in Fig. 11.75

Leaking valves and pipe fittings are the next concern when pressure is dropping during a test. Test sections should be isolated at pipeline block valves by using slip blinds to insure no leakage. If the test section cannot be blinded but the valves are double blocked instead, the operator must measure pressure increase in the adjacent section between the double-blocked valves to insure a tight seal exists. You need to be careful when using a thin “fire blind” at an isolation valve because under pressure the thin blind will deform and the blind cannot be removed without removing the entire valve. This often requires calling in vacuum trucks to remove product on the opposite side of the test valve being removed.

So, leakage through valves and fittings jeopardizes the chances for a successful test and may lead to data that cannot be correlated, and in that situation, the pipeline must be retested.

Tree piping is defined as all pipe, fittings, or pressure conduits, excluding valves and chokes, from the vertical bores of the tree to the flowline connections. The piping may be used for production, pigging, monitoring, injection, servicing, or testing of the subsea tree. Inboard tree piping is upstream of the first tree wing valves. Outboard tree piping is downstream of the first tree wing valve and upstream of the flowline connector.

Tree piping is normally designed in accordance with ASME B31.3. The guidelines in the API specifications are general and, in many cases, open to interpretation. It is up to the manufacturer to apply his engineering judgment.

Smart LED bulbs that can be controlled by a hub or smartphone app are no longer a new idea. What is new is how far this technology has come since its advent just a few years ago. Also new: Products like the Nanoleaf Light Panels—a system of interlocking LED panels that let you decorate with light—fundamentally change the light-bulb concept.
Smart LED bulbs aren’t quite a commodity, but they are getting close to maturity as far as the market goes. Today’s bulbs are more compact, much brighter, have better color representation, and, for the most part, feature control apps that do more than ever and are easier to set up. Prices have also come down, with some no-name color-tunable bulbs now available for less than $10 each. (Buyer beware: You get what you pay for.)

With their rainbow of hues and myriad party tricks, color LEDs get all the press in the world of smart lighting. It’s fun stuff, but the reality is that most of us will rarely find much of a need to turn all the lights in the house blue or red—unless it’s time to celebrate our team winning the World Series. Even then, you’ll probably want to turn them all back to white after the celebration.


White light is also important in its own right, as today there is plenty of science to show how various shades of white—with variations in color temperature—impact our psychological state. Cool light that’s closer to blue has an energizing effect, and is best in the morning. Warm light is relaxing, and is best after the sun goes down. Note, however, that not every white smart LED light is color-temperature-tunable. Check out the specs before you buy.

White smart bulbs downplay the party features that are a staple of color-tunable bulbs. On the other hand, white smart bulbs are less expensive than color bulbs, making it more affordable to roll them out in multiple rooms.

We’ve tested just about every color and white smart LED bulb on the market. You’ll find links to all our reviews at the bottom of the page, and we’ll update this story as new models are introduced.

Philips was one of the first players in this market, and the company’s experience shows. Physically, its Hue Color and Ambiance bulbs haven’t changed much since their introduction in late 2012, but the latest generation lasts a lot longer and the company has added a Bluetooth radio that obviates the need for the Philips Hue Bridge (but most smart home denizens will want the Bridge anyway). The Philips Hue ecosystem is the industry’s deepest and broadest, including not only bulbs of every shape and size imaginable, but also indoor and outdoor fixtures as well, including the Philips Hue Calla pathway light and the Philips Hue Lily outdoor spotlight, both of which we like very much.

LIFX is a very strong competitor in the smart lighting space and comes a very close second place in our roundup. LIFX no longer has just A19 and BR30 form factors to offer, and we really like its unique  LIFX+ (which has an array of infrared LEDs that will help your home security camera see in the dark), but Philips still delivers much more diversity in its ecosystem and universe of third-party support.

Our choice won’t surprise anyone who’s been following this market. Philips dominates this space and is also our top pick for best color LED smart bulb. The latest Hue bulbs can be controlled via Bluetooth or Zigbee (the latter requires the Philips Hue Bridge), they deliver high-quality light, and are backed by a strong warranty. We received the BR30 form factor for our review, but the bulb is also available in A19, candelabra, and even with vintage-style LED filaments.

The new Cree Connected Max line of smart bulbs is agressively priced and available in all the most popular form factors: A19, A21, BR30, and PAR38. The A19 Tunable White + Color Changing bulb we reviewed costs just $10, and it supports both Bluetooth and Wi-Fi, so you don’t need to factor in the added cost of a hub to integrate it into your smart home. It’s a very good product.

Most home security cameras are equipped with infrared LEDs to deliver a semblance of night vision. the LIFX+ is equipped with infrared LEDs of its own, which are active even when the bulb is turned off via software. Infrared light is invisible to the naked eye, but the LIFX+ can bathe a room in it so that your security camera can see more of the room and in more detail than it can with its own infrared LEDs. 
The 2020 version of the Philips Hue Lightstrip Plus LED is the only strip light to support both Bluetooth and the more robust Zigbee protocol (if you’re willing to pay for the required bridge to connect it to your Wi-Fi network, that is). The very nature of LED light strips renders them delicate devices, and the first review product we received broke after a short amount of time (the second one is holding up just fine). But we haven’t encountered a competing device that’s as versatile as this one. 

Smart light bulb protocols and features
Three control technologies continue to vie for leadership in the smart downlight market (Z-Wave is a major contender in smart lighting, but you won’t encounter it in bulbs—just in switches, plug-in modules, control panels, and smart-home hubs).

Zigbee: Bulbs that use the popular smart-home networking protocol require a bridge to communicate with your home Wi-Fi network. This is the technology Philips has adopted for its Hue lineup, but it’s not the only one.
Wi-Fi: This class of bulb talks directly to your Wi-Fi router, no hub or bridge required. LIFX and TP-Link both manufacture excellent Wi-Fi smart bulbs, but neither company comes close to Signify’s Philips Hue lineup in terms of the depth and breadth of the Hue ecosystem.
Bluetooth: These bulbs skip your home network altogether and pair directly with your smartphone or tablet. As such, they can’t be controlled from outside your home. GE and a number of other manufacturers make Bluetooth bulbs, some of better quality than others. Signify has recently added Bluetooth radios to its Philips Hue line of smart GU10 spotlight, which eliminates the need to deploy the Philips Hue Bridge. Taking the bridge out of the equation reduces the overall cost of deployment, but adds some limitations. You can read more in our review of the new Philips Hue bulbs.
Each of these technologies has pros and cons, so before you attempt to settle on a specific bulb, first try to determine which tech is right for you. If you want to hook your bulbs into a broader smart-home system—such as SmartThings or Nest—Bluetooth bulbs are out. You can control more than one bulb with your phone, but you can’t connect it to sensors or other systems inside your home. Don’t like the idea of pairing a bulb to your phone? A Wi-Fi bulb will work best for you, though you won’t have quite as many options as you’ll find with a Zigbee product.

Smart bulb, or smart switch?
There’s a significant argument about the best way to install smart lighting, and two approaches present themselves. You can either go with expensive smart bulbs and control them all individually, or you can use cheap dumb bulbs and install smart switches to control all the lights on that circuit. Both approaches make sense: With smart bulbs, the biggest issue is cost, but there’s also complexity to deal with. While bulbs can usually be grouped based on location, this is only as intuitive to manage as the bulb control app.

Smart switches, on the other hand, are far more complicated to install—to the point where some users might be uncomfortable dealing with exposed wiring and would prefer to hire an electrician. Smart switches, however, provide more flexibility in many installations.

Habituated from years of flipping hard-wired switches, many users (or their children) will instinctively use the wall switch to turn the lights out when they leave a room. Once that happens, all the apps in the world won’t be able to turn the light back on until the switch is returned to the on position. While this won’t be an issue if you install smart switches, they can’t change a bulb’s color or color temperature.

That said, smart bulbs, no matter what the technology, still won’t be right for everyone. Notably, most of these bulbs cannot be dimmed via a hardwired wall switch (it messes with the power going to the radio, rendering them useless). Some will fail even if a dimmer is present on the circuit and dialed up to full power. The quality of light from an LED bulb is likely to be much, much better.

The good news is that bulb prices are going down, so it’s easier to get started with 2.4G/IR LED bulb and less punishing should you find that a product doesn’t work for you. That said, we want to get you started on the right foot. So without further ado, here are deep dives into the most worthwhile color and white LED smart bulbs on the market. 

DIY projects allow you to achieve the result that you desire. Utilizing your skills and artistic talents is related to this matter, and it’s also a way to save some bucks. With regards to this, many boaters can manage how to build a boat bench seat by themselves.

You may have wood for building boat seats. Some upgrades can be done by adding cushion and vinyl. Once you choose a design, you can start collecting materials.

If you’re groping for design ideas, this article will show you DIY boat bench seats that will surely please you. You can follow them to refurbish or renovate a boat.
Various boat styles showcase different angles and lines. Wide and deep hulls are the main characteristics of workboats, while sailboats are thin and long. Nonetheless, a wooden banquette would be fantastic on both of these vessels. Here are the steps:

Step 1. Take off Metal and Trim
A banquette is a bench along the wall. Therefore, you have to consider the needed space and shape for it. The center section of the boat is where you need to lay down this project.

To get started, you have to remove metal or trim but you must keep the pieces for reconnection later on. You may also need to take off logos and insignias that are still useful.

Step 2. Cutting the Chosen Area
Use chalk to draw a line on your chosen area then you can run the chainsaw over it. Cutting the area should be even and consistent. You may need to tidy up the cutting with a circular saw.

You have to be attentive while doing it as there may be some screws. These tiny pieces of hardware may be hiding underwood plugs.

Step 3. Cleaning
Get rid of the debris created by cutting since it can block from cutting the bottom part.

Step 4. The Bench Base
Use two pieces of 2×4 wood and place them 16 inches above the pontoon boat furniture with the support from screws for wood. This step is not only for building the base but hull reinforcement as well.

Get ¾-inch plywood to be added over the 2×4 woods with screws. This will strengthen the structural integrity that may have temporarily gone due to the cuttings that were made.

Step 5. Seat Back
You may recycle some wood that just lay around or V-groove soffit panels. Get measurement from the seat to the boat anchor for the preparation of the seatback.

To ensure that you’re going to create comfortable seats, add horizontal wood blocks that tilt at a slight angle. Install the seatback with 15-gauge finish nails.

Step 6. Seat Attachment
You may choose any suitable wood for the seat. Mahogany and tropical hardwoods like ipe are the best examples. Pre-drilled screw holes should be done before assembling the parts. Make planks for the bench size that you like and fasten them with stainless wood screws.

Step 7. Painting the Banquette
If you use recycled wood with some paint on it, you need to sand it before applying a new coat.

Step 8. The Last Touch for Refinement
You have to add a routed edge over the wooden seat. Then, you can put back the metal and insignia that you removed when starting this project.

The finishing touches will be covering the back panels with new paint, applying oil on the wood to have an attractive sheen, and sealing the original parts with polyurethane.
When thinking of comfortable bench seats for boats, cushions and vinyl may be the first things that come into your mind. You can skip buying ones for your aluminum boat and instead, make them yourself for customization.

So, here’s a guide on how to make a boat rear bench seat if you don’t mind sewing some seat cover.
Making a rectangular box frame is the very first step. Make three sides for the lower portion, and they will touch the transom and the floor. Its top will be able to flip and access the engine.

Make some plywood strips based on the measurement of the bench seat. You may have a shop cut it for you. Some 1”x1.5” pressure treated lumber, waterproof wood glue, and 1” staples are the things that you need to put the pieces together.

After forming the box out of the plywood strips, get rid of splinters by sanding. This process can also break the edges to prevent damaging the vinyl. After sanding, you can apply two coatings of paint.

Once the glue has dried, place it on the designated area in your boat. It’s sturdy and it won’t give you problems.

Step 2. Setting the Vinyl Down
You don’t have to put vinyl at the bottom of the box. An extra piece is needed to be wrapped under the seat. Just apply more effort in working for a nice appearance and allow a vinyl skirt to hang.

Make sure to leave a margin of about half an inch for sewing the edges. This is enough to match the cording’s size. Use the double-sided tape to hold the cording and make it curved without twisting or binding.

If you know how to use the sewing machine, you’ll be fine. But if not, you can ask someone to do it for you. When vinyl is sewn properly, you can install the bench.

Step 3. Cutting the Foam
Measure the amount of foam that you need, then mark it. Cutting can be done with an electric knife. Give ½” extra to ensure that the vinyl cushion is stuffed nicely. When you have the right piece of foam, glue it on the top of the box.

Batting should be added on the sides for some cushioning with the roughly estimated size. It gives the seat a fuller look. Use a Loctite adhesive to glue it and trimming is needed once it sits in the right place.

Step 4. Adding the Vinyl by Stapling
Stapling creates a serious grip and adequate strength to hold the vinyl in place. It’s best to use stainless staples. You can begin on the opposing side and work your way to finish tucking the whole piece of vinyl.

Just keep pulling, stapling, and tucking to obtain a neat result. At this point, you have finished a bench seat or a motor box for your aluminum boat.
As long as you have time, resources, and willingness to work, there’s no reason that you won’t try following the steps on how to build a boat bench seat. You can choose the color, design, size, and materials that you like from these two guides.

Some boaters want to customize the looks of their boats to represent their personalities. No one is stopping you from doing so! It can be a technique to give life to an old boat. Also, you can always make a bench seat in a set-up that brings comfort.

Did you find this article helpful? If yes, share with anyone who would need this.
It’s the time of the year again when being out on the water is the best place to be. In the heat of the summer sun, there’s really nothing like sitting on a pontoon boat to just drift on a calm lake or spend an entire afternoon fishing. Pontoon boats get a lot of attention during the summer months, and it’s only right to take preventative measures in order to keep the health of your boat in check. One of the easiest ways you can do this is by protecting the pontoon’s seats using seat covers. If you’re thinking about buying pontoon folding boat seat covers, here is a quick guide on what you should look for.

Material
Pontoon seat covers are made out of many different kinds of materials. The lowest end in the spectrum would be a simple plastic tarp. Although plastic tarps will do the job of covering your seats, they aren’t particularly durable. Plastic tarps are great alternative for quick-fix solutions, but they are not permanent options.
The next step up to plastic would be canvas tarps. Canvas tarps have long been used as a general cover-up material in boating. They are more durable than plastic in many ways. However, they are also more susceptible to mildew and mold. Canvas tarps today are most often referred to as marine vinyl. It’s still a good alternative if you prefer to use it, but canvas is also easy to stain. Either way, your canvas will definitely protect your pontoon boat seats, but they won’t last as long untreated. If you want your marine vinyl to last longer and protect your flip up boat seat better, you can treat them a waterproof and/or UV spray. The best materials for pontoon seat covers are vinyl blends or polyester. These materials are highly durable and easy to take care of. They are also more resistant to the elements; therefore, they can protect your seats better. Most vinyl blends also offer some breathability factors, so mold and mildew won’t have much room to grow in—even in the most humid conditions.

Size
You might automatically think that larger is better when it comes to pontoon boat covers, but that’s not necessarily true. Although a larger size will allow you to cover more area, it’s important to measure fit more than anything. Since pontoon boats are exposed to the elements continually, a fitted seat cover will do a better job in protection. Any excess room caused by an unfitted cover will just be excess room for more water or air to enter and damage your pontoon seats.

This is why it’s important to measure your pontoon seats before you go out looking for seat covers. This article discusses how you can measure your seat covers properly. Once you have the dimensions written down, you can then continue shopping for pontoon seat covers. Make sure you check your dimensions against the size of the covers before you purchase. It also helps to read reviews regarding the size of the cover from those that have purchased the same product before. You can also get information from the manufacturer of both the seat cover and your low back folding boat seat.

Other things to look for
Apart from material and size to consider, you might want to also think about a few other things before you buy a pontoon seat cover. First, you might want to think about ease of use and storage. When you’re not using your pontoon seat covers, where are they going to go? Can they easily be folded up and stowed away someplace on your pontoon boat?

There are also seat covers that might utilize the use of zippers or elastic. Some people prefer seat covers that will just slip over your pontoon seats. But there are others that are so fitted; you’d have to zip them up in place. There are seat covers that come with enclosures and others that don’t. It might not matter to some people, but style and color matter to others. You might find that a lot of pontoon seat covers come in a white color, neutral, or blue color. Whites and neutral colors reflect the sunlight better than darker colors.

A temperature sensor has been developed using an embedded system and a sensor head made of polymer-derived SiAlCN ceramics (PDCs). PDC is a promising material for measuring high temperature and the embedded system features low-power consumption, compact size, and wireless temperature monitor. The developed temperature sensor has been experimentally tested to demonstrate the possibility of using such sensors for real world applications.

1. Introduction
Accurate temperature measurements are crucial for many applications, such as chemical processing, power generation, and engine monitoring. As a result, development of temperature sensors has always been a focus of microsensor field. A variety of materials have been studied for temperature sensor applications, for example, semiconducting silicon and silicon carbide. Silicon based sensors are typically used at temperatures lower than 350°C due to accelerated material degradation at higher temperature [1, 2]. Silicon carbide based sensors are better than silicon based sensors in high temperature measurement and can be applied in temperatures up to 500°C [3–5].

Polymer-derived SiAlCN ceramics (PDCs) are another widely studied material that demonstrate properties such as excellent high temperature stability [6] as well as good oxidation/corrosion resistance [7]. PDCs have been considered as a promising material for measuring high temperature [8]. Our early works have showed that PDC sensor head can accurately measure high temperature up to 830°C [9] using data acquisition system from National Instruments. The cost and size of the sensor system must be significantly reduced before it can be deployed for real world applications. In this paper, we develop a temperature sensor using PDC and an embedded system. Comparing to the National Instruments data acquisition equipment used in the previous paper, the newly developed embedded sensor is much smaller (9.7 dm3 versus 0.3 dm3), lighter (5.97 kg versus 0.19 kg), and cheaper (approximately $8000 versus $170). A WiFi module is also added so the temperature measurement can be transmitted wirelessly. The embedded board and WiFi module used in this paper are commercially available. The experiments in this paper demonstrate the possibility of deploying PDC based sensors for real world applications.

2. Fabrication of the PDC Sensor Head
In this study, the PDC sensor head is fabricated by following the procedure reported previously [9]. In brief, 8.8 g of commercially available liquid-phased polysilazane (HTT1800, Kion) and 1.0 g of aluminum-tri-sec-butoxide (ASB, Sigma-Aldrich) are first reacted together at 120°C for 24 hours under constant magnetic stirring to form the liquid precursor for SiAlCN. The precursor is then cooled down to room temperature, followed by adding 0.2 g of dicumyl peroxide (DP) into the liquid under sonication for 30 minutes. DP is the thermal initiator which can lower the solidification temperature and tailor the electrical properties [10]. The resultant liquid mixture is solidified by heat-treatment at 150°C for 24 hours. The disk-shaped green bodies are then prepared by ball-milling the solid into fine powder of ~1 μm and subsequently uniaxially pressing. A rectangular-shaped sample is cut from the discs and pyrolyzed at 1000°C for 4 hours. The entire fabrication is carried out in high-purity nitrogen to avoid any possible contamination.

Pt wires are attached to the sensor head by two ceramic fasteners on the two mounting holes on the diagonal of the sensor head. To improve the conductivity, both mounting holes are coated with Pt plasma; see Figure 1.

To measure temperature using the PDC sensor, the processor needs to perform the following tasks: () supply voltage  to the circuit through DAC7724; () sample the circuit output  using AD7656 and convert the output to temperature measurement; and () transmit data to readers from the RS232 port.

The input signal  to the conversion circuit is a sinusoidal signal of ±10 V. The sinusoidal signal can bypass the parasitic capacitor in series to the PDC probe. The noise from the furnace coil can also be greatly subdued. The sensor output voltage  is approximately sinusoidal as well and its magnitude can be computed using Fast Fourier Transformation (FFT) or curve fitting using recursive least square method (RLSM) [11]. Comparing to FFT, RLSM is more computationally efficient but may have numerical instability because TMS320F28335 only supports IEEE 754 floating-point arithmetic. Here we prefer FFT for fast prototyping purpose because Texas Instruments provides FPU library that performs floating FFT routines on C2000 series microcontroller. Next we explain how the sensor works.

A high-priority interrupt service request (ISR1) based on a CPU timer continues reading a look-up-table and drives the DAC7724 to generate the input signal . The frequency of  is controlled by the frequency of ISR1. ISR1 also samples circuit output from AD7656 and adds the data to a 1024-point buffer if there is no FFT running. Once the buffer is filled up, ISR1 stops writing the buffer and the FFT routine starts. The FFT routine is implemented in another slower low-priority interrupt service (ISR2). Once the FFT routine is completed, ISR2 will give ISR1 the permission to clean and write the input buffer again. The magnitude from the FFT is used as the circuit output . The software flowchart is shown in Figure 4.

High temperature sensors capable of operating in harsh environments are needed in order to prevent disasters caused by structural or system functional failures due to increasing temperatures. Most existing temperature sensors do not satisfy the needs because they require either physical contact or a battery power supply for signal communication, and furthermore, neither of them can withstand high temperatures nor rotating applications. This paper presents a novel passive wireless temperature sensor, suitable for working in harsh environments for high temperature rotating component monitoring. A completely passive LC resonant telemetry scheme, relying on a frequency variation output, which has been applied successfully in pressure, humidity and chemical measurement, is integrated with a unique high-k temperature sensitive ceramic material, in order to measure the temperatures without contacts, active elements, or power supplies within the sensor. In this paper, the high temperature sensor design and performance analysis are conducted based on mechanical and electrical modeling, in order to maximize the sensing distance, the Q factor and the sensitivity. In the end, the sensor prototype is fabricated and calibrated successfully up to 235ºC, so that the concept of temperature sensing through passive wireless communication is proved. 

This paper aims to develop a prototype for a web-based wireless remote temperature monitoring device for patients. This device uses a patient and coordinator set design approach involving the measurement, transmission, receipt and recording of patients’ temperatures via the MiWi wireless meter iot solution. The results of experimental tests on the proposed system indicated a wider distance coverage and reasonable temperature resolution and standard deviation. The system could display the temperature and patient information remotely via a graphical-user interface as shown in the tests on three healthy participants. By continuously monitoring participants’ temperatures, this device will likely improve the quality of the health care of the patients in normal ward as less human workload is involved.

Background
During the severe acute respiratory syndrome (SARS) outbreak in 2003, hospitals became treatment centres in most countries. Because a patient’s core body temperature is one vital parameter for monitoring the progress of the patient’s health, it is often measured manually at a frequency ranging from once every few hours to once a day [1]. However, such manual measurement of the temperature of patients requires the efforts of many staff members. In addition, when the patients suffer from conditions that result in abrupt changes of the core body temperature, e.g., due to infection at a surgical site after surgery, the staff on duty will not know such a temperature change occurred until the next temperature measurement. Such a delay may lead to patients being unnoticed while their health conditions worsen, which is dangerous because a difference of 1.5 degrees Celsius can result in adverse outcomes [2]. Furthermore, there is always a need to have a monitoring system to improve the quality of health care [3], such as temperature monitoring of elderly and challenged persons using a wireless remote temperature monitoring system.

Body temperature can be used to monitor the pain level of a patient following an operation [4] or after shoulder endoprosthesis [5]. In some cases, the tissue transient temperature was monitored during microwave liver ablation [6] for the treatment of liver metastases. Instead of using a temperature sensor, pulse-echo ultrasound [7] was used to visualize changes in the temperature of the patient’s body. In addition, a non-contact temperature-measuring device, such as a thermal imaging camera [8], was successfully used to detect human body temperature during the SARS outbreak. However, it can be quite expensive to equip each patient room with a thermal imaging camera. In addition, there are a few wireless temperature measuring solution (e.g., CADIT™, Primex™, and TempTrak™) on the market that are used to monitor and store a patient’s temperature for medical research by using body sensor networks [9]. Most of these systems consist of an electronic module and a temperature-sensing device. The systems include a stand-alone electronic module with a display screen that allows the temperature sensor data to be transmitted over a secure wireless network.

However, these systems can be difficult to reconfigure to suit the current database system used in the hospital. In addition, the current systems using short message service (SMS)-based telemedicine [10] systems with hardware equipment were developed to monitor the mobility of patients. However, proper hardware and software to manage the messages and the patient’s temperature for display on mobile phones are not widely available.

Hence, a medical device to continuously measure the body temperature of patients using a wireless temperature receiver [4,11,12] is required. With such a wireless temperature sensor system, nurses will no longer have to manually measure the temperature of patients, which will free their time for other tasks and also reduce the risk associated with coming into contact with patients with contagious diseases, such as SARS. The readings will be transmitted wirelessly to the central nurse station, where they can be monitored by the staff-on-duty. In addition, the current and past history of the body temperature measurements can be stored in an online database, which allows the medical staff to access the database when they are not in the hospital.

To the best of our knowledge, a MiWi wireless (besides using the Zigbee[11]) temperature-monitoring system using a patient and coordinator set design that provides remote internet access to the temperature database has not been reported in any publication. The objective is therefore to develop and implement a prototype temperature-monitoring system for patients using a MiWi wireless remote connection to the nurse’s station for frequent real-time monitoring. The temperature monitoring system was designed based on a proposed patient and coordinator set design approach. The proposed temperature-monitoring system for use in normal ward will likely to improve the quality of the health care of the patients as the nursing workload is reduced. In this paper, the discussion on medical regulations and policy will not be included.

Silahkan ajak teman anda untuk melihat prediksi bola dan skor akurat malam ini berupa h2h, ou bersama situs resmi yang dapat dilihat secara gratis di bapakprediksi

Massage tables are quite different as compared to a massage chair. From their working to their price, everything is entirely different; although the function remains the same. Both are here to help you relax and unwind.