Screwed Gamers Homepage

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
What is a Brushless DC Motor and How Does It Work?
#1
 At present, DC brushless blowers mostly use brushless DC motors, which greatly simplify the structure of brushless DC motors by eliminating the collector ring and brushes for excitation. It not only improves the technical performance of the motor, but also greatly improves the mechanical reliability and life of the motor. Not only that, it also has excellent control performance compared with other motors. This is because the torque constant, torque inertia ratio, and power density of the motor have been greatly improved due to the high performance of permanent magnet materials.

      Through reasonable design, the inertia and electromechanical time constant can be greatly reduced and greatly improved as the main index of servo control performance. The design of modern permanent magnet circuit has been improved, and the coercivity of permanent magnet material is high. As a result, the armature response and demagnetization resistance of permanent magnet motors have been greatly improved, and the control parameters of the motors have been greatly reduced under the influence of external disturbances.

      Since permanent magnet is used instead of electric excitation, the design of excitation winding and magnetic field is reduced, thus reducing the parameters such as excitation flux, excitation winding inductance and excitation current, thus enabling the control variables or parameters to meet the design requirements. Direct reduction. All these factors can be said that DC brushless blowers have good controllability.

  DC brushless motors are widely used in daily life, so do you know the advantages of DC brushless motors, the following I introduce you to the characteristics of DC brushless motors.

1, no carbon brushes, low interference DC brushless motor in addition to carbon brushes, the most direct change is that there is no brush geared motor operation generated by electric sparks, which greatly reduces the interference of electric sparks to remote radio equipment.

2, low noise, smooth operation DC brushless motor without brushes, friction is greatly reduced when running, smooth operation, noise will be much lower, this advantage for brushless geared motor running stability is a huge support.

3, long life, low maintenance costs DC brushless motor less carbon brushes, brushless geared motor wear is mainly on the bearings, from a mechanical point of view, brushless geared motor is almost a maintenance-free motor, when necessary, only need to do some dusting maintenance can be. Brushless DC motor life is generally between several tens of thousands of hours, while the ordinary brush motor life is generally between 1000-2000 hours.

4、Energy saving and noise reduction DC brushless motor adopts frequency control and stepless speed regulation to realize indoor constant temperature control, which saves energy up to 50% or more than traditional AC fan coils.

The blower is mainly composed of the following six parts: motor, air filter, blower body, air chamber, base (and oil tank), and drip nozzle. The blower runs eccentrically by the rotor offset in the cylinder and makes the volume change between the blades in the rotor slot to suck in, compress and spit out the air. In the operation of the blower using the pressure difference between the automatic lubrication to the drip nozzle, drip into the cylinder to reduce friction and noise, while maintaining the cylinder gas does not flow back, this blower is also known as the slide blower. The blower's types can be classified acccording to its applications, including, CPAP blowerBipap blowerICU ventilator blowerPurifying respirator blowerAir bed blowerHome appliance blower, etc.

Application prospects of brushless DC motor

Brushless DC motors have superior performance compared with other types of motors. Brushless DC motors are widely used in home ventilator motors, oxygen generators, small medical blowers and so on. Brushless DC motors have a good application prospect. However, there are still many problems to be solved and further research is needed. At present, the development of brushless DC motors has reached a relatively mature stage, but along with the continuous impact on materials, electronics and control technology, it is bound to develop in the direction of miniaturization, digitalization, long life and high reliability, and will certainly play a greater role in industrial production.

Brushless DC motors are common in industrial applications across the world. At the most basic level, there are brushed and brushless motors and there are DC and AC motors. Brushless DC motors, as you may imagine, do not contain brushes and use a DC current.

These motors provide many specific advantages over other types of electrical motors, but, going beyond the basics, what exactly is a brushless DC motor? How does it work and what’s it used for?

How a Brushless DC Motor Works
It often helps to explain how a brushed DC motor works first, as they were used for some time before brushless DC motors were available. A brushed DC motor has permanent magnets on the outside of its structure, with a spinning armature on the inside. The permanent magnets, which are stationary on the outside, are called the stator. The armature, which rotates and contains an electromagnet, is called the rotor.

In a brushed DC motor, the rotor spins 180-degrees when an electric current is run to the armature. To go any further, the poles of the electromagnet must flip. The brushes, as the rotor spins, make contact with the stator, flipping the magnetic field and allowing the rotor to spin a full 360-degrees.

A brushless DC motor is essentially flipped inside out, eliminating the need for brushes to flip the electromagnetic field. In brushless DC motors, the permanent magnets are on the rotor, and the electromagnets are on the stator. A computer then charges the electromagnets in the stator to rotate the rotor a full 360-degrees.

What are Brushless DC Motors Used For?
Brushless DC motors typically have an efficiency of 85-90%, while brushed motors are usually only 75-80% efficient. Brushes eventually wear out, sometimes causing dangerous sparking, limiting the lifespan of a brushed motor. Brushless DC motors are quiet, lighter and have much longer lifespans. Because computers control the electrical current, brushless DC motors can achieve much more precise motion control.

Because of all these advantages, brushless DC motors are often used in modern devices where low noise and low heat are required, especially in devices that run continuously. This may include washing machines, air conditioners and other consumer electronics. They may even be the main power source for service robots, which will require very careful control of force for safety reasons.

Brushless DC motors provide several distinct advantages over other types of electric motors, which is why they’ve made their way into so many household items and may be a major factor in the growth of service robots inside and outside of the industrial sector.
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)